可调实时时间差电子错位散斑技术及应用

本文首次提出一种可调实时时间差电子错位散斑干涉技术,并成功地用于热变形测量,该方法还可用于长时间连续变形和瞬态大变形的位移测量。叙述了该技术的原理,给出了一些应用的实验结果。     

Effect of Ga doping on magneto-transport properties in colossal magnetoresistive La0.7Ca0.3Mn1−xGaxO3 (0<x<0.1)

Samples of La_0.7Ca_0.3Mn_1−xGa_xO₃ with x=0, 0.025, 0.05 and 0.10 were prepared by standard solid-state reaction. They were first characterized chemically, including the microstructure. The magnetic properties and various transport properties, i.e. the electrical resistivity, magnetoresistivity (for a field below 8 T), thermoelectric power and thermal conductivity measured each time on the same sample, are reported. The markedly different behaviour of the x=0.1 sample from those with a smaller Ga content, is discussed. The dilution of the Mn³⁺/Mn⁴⁺ interactions with Ga doping considerably reduces the ferromagnetic double exchange interaction within the manganese lattice leading to a decrease of the Curie temperature. The polaron binding energy varies from 224 to 243 meV with increased Ga doping.     

Study of thermal aging effect on space charge in poly(methyl methacrylate)

Charges evolution in poly(methyl methacrylate) (PMMA) samples under thermal aging effect has been studied by means of two complementary techniques, thermal step method (TSM) and thermally stimulated depolarization current (TSDC). For the first method, measurements reveal that injected charges, whose quantity is found depending on the number of applied temperature cycles, remain close to the surface sample. TSDC measurements have been carried out for different temperatures ranging from 25 °C to 140 °C. Three distinguishable dipolar relaxations (β₁, β₂ and α) have been highlighted. In the same way, the presence of polarization and injected charges has been confirmed. In support of electric characterization, X-ray reflectometry has been used. The obtained results equally emphasized the thermal aging effect on the material.     

Two types of the effective mass divergence and the Grüneisen ratio in heavy-fermion metals

The behavior of the specific heat c_p, effective mass M^*, and the thermal expansion coefficient of a Fermi system located near the fermion condensation quantum phase transition (FCQPT) is considered. We observe the first type behavior if the system is close to FCQPT: the specific heat , , while the thermal expansion coefficient . Thus, the Grüneisen ratio Γ(T)=/c_p does not diverges. At the transition region, where the system passes over from the non-Fermi liquid to the Landau Fermi liquid, the ratio diverges as . When the system becomes the Landau Fermi liquid, Γ(T,r)∝1/r, with r being a distance from the quantum critical point. Provided the system has undergone FCQPT, the second type takes place: the specific heat behaves as , M^*∝1/T, and =a+bT with a,b being constants. Again, the Grüneisen ratio diverges as .     

Thermal characterisation of micro-hotplates used in sensor structures

Micro-hotplates operated at elevated temperature form the basic element in several sensor devices, such as integrated calorimetric or Taguchi-type gas sensors and flow-rate sensors. In all of these applications thermal properties of the sensing elements play a determining role in functional operation, therefore, their accurate characterisation is essential. The micro-hotplates investigated were developed by one side porous silicon micro-machining technology, forming Pt micro-filaments embedded in non-stoichiometric silicon nitride, and suspended across a cavity. This work is dealing with the accurate temperature detection in the micro-scale by different measurement methods for the deduction of steady state and transient thermal properties from the results. Transient properties of the structure were investigated by application of a simplified thermal equivalent circuit model.     

Ab initio calculations of accurate dissociation energy and analytic potential energy function for the second excited state B1∏ of 7LiH

The reasonable dissociation limit of the second excited singlet state B¹∏ of ⁷LiH molecule is obtained. The accurate dissociation energy and equilibrium geometry of the B¹\Pi state are calculated using a symmetry-adapted-cluster configuration--interaction method in full active space. The whole potential energy curve for the B¹∏ state is obtained over the internuclear distance ranging from about 0.10nm to 0.54nm, and has a least-square fit to the analytic Murrell--Sorbie function form. The vertical excitation energy is calculated from the ground state to the B¹∏ state and compared with previous theoretical results. The equilibrium internuclear distance obtained by geometry optimization is found to be quite different from that obtained by single-point energy scanning under the same calculation condition. Based on the analytic potential energy function, the harmonic frequency value of the B¹∏ state is estimated. A comparison of the theoretical calculations of dissociation energies, equilibrium interatomic distances and the analytic potential energy function with those obtained by previous theoretical results clearly shows that the present work is more comprehensive and in better agreement with experiments than previous theories, thus it is an improvement on previous theories.     

Thermal behaviour of polyacrylamidoxime-copper chelates

The purpose of this work was to investigate the effect of several factors (anion type in the copper salt, pH and concentration of the salt solution) on the structure and thermo-oxidative degradation of the polyacrylamidoxime-copper chelates, by using elemental analysis, IR spectroscopy and dynamic thermogravimetry. The chelates containing copper ions as sulphate exhibit a better initial thermal stability than the polyacrylamidoxime fibre presumably due to the crosslinking generated by the intermolecular complexation of the ions; the removal of the sulphate anions takes place concomitantly with the second step of polymeric chain decomposition. The initial thermal decomposition of the chelates formed by copper ions as nitrate begins at lower temperatures as compared to the polyacrylamidoxime fibre, probably by the nitrate anion release, which partly overlaps the initial decomposition of the copper ion-crosslinked polymeric chains. Copper ions as either sulphate or nitrate catalyse the reactions involved in the main step of polyacrylamidoxime fibre decomposition; the higher the copper amount, the stronger the catalytic effect.     

Thermal conductivity, dislocation density and GaN device design

The performance of high power transistor devices is intimately connected to the substrate thermal conductivity. In this study, the relationship between thermal conductivity and dislocation density is examined using the 3 omega technique and free standing HVPE GaN substrates. Dislocation density is measured using imaging cathodoluminescence. In a low dislocation density regime below 10⁵ cm⁻², the thermal conductivity appears to plateau out near 230 W/K m and can be altered by the presence of isotopic defects and point defects. For high dislocation densities the thermal conductivity is severely degraded due to phonon scattering from dislocations. These results are applied to the design of homoepitaxially and heteroepitaxially grown HEMT devices and the efficiency of heat extraction and the influence of lateral heat spreading on device performance are compared.     

Multiscale Finite Element Modeling of Arc Dynamics in a DC Plasma Torch

The dynamics of the electric arc inside a direct current non-transferred arc plasma torch are simulated using a three-dimensional, transient, equilibrium model. The fluid and electromagnetic equations are solved numerically in a fully coupled approach by a multiscale finite element method. Simulations of a torch operating with argon and argon–hydrogen under different operating conditions are presented. The model is able to predict the operation of the torch in steady and takeover modes without any further assumption on the reattachment process except for the use of an artificially high electrical conductivity near the electrodes, needed because of the equilibrium assumption. The results obtained indicate that the reattachment process in these operating modes may be driven by the movement of the arc rather than by a breakdown-like process. It is also found that, for a torch operating in these modes and using straight gas injection, the arc will tend to re-attach to the opposite side of its original attachment. This phenomenon seems to be produced by a net angular momentum on the arc due to the imbalance between magnetic and fluid drag forces.     

SiO2与Keggin杂多酸相互作用的研究

采用经典酸化与乙醚萃取相结合的方法，制备了Keggin型杂多酸H3PMo12O40，并以SiO2为载体制备了经不同温度焙烧的负载型杂多酸样品，利用TG、DTA、IR、XPS、NH3－TPD等手段，对负载前后的杂多酸样品进行了表征；考察了SiO2与杂多酸之间的相互作用以及载体对杂多酸酸性的影响，研究发现，SiO2载体的引入，可以有效改善杂多酸的热稳定性，焙烧温度的升高，会显著降低杂多酸的酸性，并提出SiO2杂多酸的相互作用方式。